Deyang dongfang yoyik supply Carbon Brush D252 16*25*32

Date:2019/1/8 17:52:21 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

Deyang dongfang yoyik supply Carbon Brush D252 16*25*32

We provide Generator Carbon Brush D252 16*25*32 according to the model, drawings or the samples you supply.Carbon brushe, also known as brushes, are widely used in many electrical applications as a sliding contact. The carbon brush is mainly made of graphite, impregnated graphite, metal (including copper, silver) graphite.

 

A good performance mark for carbon brushes should be:

1) A uniform, moderate and stable oxide film can be formed on the surface of the commutator or the collector ring.

2) The carbon brush has a long service life and does not wear the commutator or the collector ring.

3) The carbon brush has good commutation and current collecting properties, so that the spark suppression is within the allowable range and the energy loss is small.

4) When the carbon brush is running, it is hot, the noise is small, the assembly is reliable, and it is not damaged.

Replacement situation:

When the carbon brush appears in the following situations, it should be replaced:

1. The wear is serious (less than 1/3 of the original length);

2. The damage is serious;

3. The contact surface between the carbon brush and the slip ring is less than 70%.

The same series of products are: 

Carbon brush J164 20*40*60

Carbon brush J164 12.5*32*40

Carbon brush J164 25*32*65

Carbon brush J164 16*32*40

Carbon brush J164 20*50*70

Carbon brush D172 25*32*60

Carbon brush D172 12*12*28

Carbon brush D172 20*32*40

Carbon brush D172 25*32*50

Carbon brush D172F 16*32*64

Carbon brush  25.4*38.1*102

DFCL-2019-1-8-A