NEWS & INFO
YOYIK Sensor T-bar plate APH GJCT-15-E hot sale
Date:2020-2-21 8:16:29 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

 The Sensor T-bar plate APH GJCT-15-E is mainly installed on the bearing caps of various rotating machinery (such as steam turbines, compressors, fans and pumps). It is an electromagnetic sensor that cuts magnetic lines by a moving coil and outputs a voltage. Therefore, it does not require power supply during operation and is easy to install. Mounting position: Mounted vertically or horizontally on the vibration point to be tested. The probe is fixed with M10×1.5 screws.

Sensor T-bar plate APH GJCT-15-E

 
The Sensor T-bar plate APH GJCT-15-E is equipped with a vibration monitoring and protection device, which can measure the bearing vibration of various rotating machinery. It can detect the failure of various rotating machinery at an early stage, output the standard 4-20mA current signal, and send it to PLC, DCS and DEH systems. 
 
Pls feel free to contact us if you need any other sensors:
 
LVDT Position Sensor HL-3-200-15
Signal Converter DF-KTVI-1
LVDT Position Sensor DET300A
Rotation Speed Probe DF6101
LVDT Position Sensor HL-6-250-15
BOLT HEATER ZJ-17-1A
temperature sensor 4Q15244
Rotation Speed Sensor ZS-01
Overspeed Protection Card DMOPC001
Rotation Speed Sensor CS-3F
Signal Acquisition Card 3L4645
Synchronous Signal and Pulse Board 3L4487
Rotation Speed Monitor DF9011
LVDT Position Sensor HTD-100-3
 
[2020-2-21-Z]
Copyright Reserved 2016 @ Dongfang YOYIK Engineering Co; Ltd, PHONE:+86 838-2226655 2306509 2207616 2310388
ADDRESS:15F, Block B, Kaixuan Int'l Building, Deyang, Sichuan
SERVICE
点击这里给我发消息
SERVICE
点击这里给我发消息
SERVICE
点击这里给我发消息
SERVICE
点击这里给我发消息